Below you will find a selection of videos with our labelling solutions for pharmaceutical products as vial, ampoules, syringes, cartridges and pen injectors

Vial and ampoule labelling solutions

;

Facts / Specifications:

Products: Ampoules, vials and small bottles
Product material: Glass and plastic
Product diameter: ø10,75mm - ø50mm
Product height:  21-100mm
Label: Size: Min. width 15mm
Label material: Paper, PP, PE
Machine capacity: Up to 150 products per min.

Datasheet for ampoule / vial labeller

;

Facts / Specifications

Products: vials, ampoules
Product material: Glass
Product diameter: ø12,7 x 62 mm
Label print: Laser
Capacity : minimum 7000 vision-approved ampoules per hour
 
Vision inspection of :
 
  • Label print and reject
  • Correct placment of label
 
;

Facts / Specifications:

Products: Ampoules, vials and bottles
Product material: Glass and plastic
Product diameter: ø10,75mm - ø 50mm
Product height: 21 - 100mm
Label: Size: Min. width 15mm
Label material: Paper, PP, PE
Label print: Thermal transfer print
Machine capacity: Up to 150 vials per min.
Tolerances: ±0,75 mm  Skew +/- 1mm or 1°

Vision inspection:

  • Label print and reject
  • Correct placement of label
;

Facts / Specifications:

Products: Vials and bottles
Product material: Glass and plastic
Product diameter: ø14mm - ø 50mm
Product height: Min. 30mm
Label: Size: Min. width 15mm
Label material: Paper, PP, PE
Label print: Thermal transfer print
Machine capacity: Up to 300 vials per min.

Vision inspection:

  • Label print and reject
  • Correct placement of label

Vial labeller brochure

;

Facts / Specifications:

Products: Vials and bottles
Product material: Glass and plastic
Product diameter: ø14mm - ø 35mm
Product height: Min. 30mm
Label: Size: Min. width 15mm
Label material: Paper, PP, PE
Label print: Laser
Machine capacity: Up to 400 vials per min.

Vision inspection of:

  • Label print and reject
  • Correct placment of label

Off-line and In-line labelling of syringes

;

 

 

Facts / Specifications:

Products: Syringes
Product material: Glass and plastic
Tray materials: POM or PE or ABS (If 3D printed), Weight 440g (3D printed is ligther) 
Height: 2200 mm
Machine capacity: 30 / minute
Tolerance: ± 0,3 mm along the syringe, measured from a fixed point/lione on the label
 
 

 

;

Facts / Specifications

Products: Syringes
Product material: Plastic or glass
Label print: With laser
Machine capacity: Depending if it is manual infeed as shown here, or infeed from in-line up-stream 

Sensor inspection and reject functions of:

  • Syringe
    (Air bubbles, Missing content, Dark content, liquid between ribs and tip cap closure)
  • Label print before application
    - Batch data
    - Manufacturing date
    - Batch number
    - GTIN number
    - (Serial number)
    - 2D code (UDI)
  • Label presence and placement on the syringe

Labelling of cartridges

;

 

 

Facts / Specifications:

Products: Cartridges
Product material: Glass and plastic
Label material: Paper, PP, PE
Tray handling system
Machine capacity: Minimum of 38 labeled and vision inspected cartridges/min
Vision inspection of label presence and position on cartridges
Tolerance: +/- 0,2 mm

 

Labelling solutions for pen injectors

;

Facts / Specifications

Products: Devices / pens
Product material: Plastic
Label print: Thermal transfer print
Machine capacity: 80 products per minute

Vision inspection and reject functions of:

  • Pen prior to labeling combined with reject station for non approved pen
  • Labels prior to application combined with reject station for non approved labels
  • Label on pen after application combined with reject station for pens with non approved label application
;

Facts / Specifications

Products: Pens
Product material: Plastic
Label print: Thermal transfer print
Machine capacity: 50 products per minute
Tray infeed and outfeed module 
 
Tolerance : 1.0mm Label Placement on height of device.
 

Sensor inspection of:

  • Label print before apply
  • Label presence at pen

Contact our specialists within labelling solutions for the pharmaceutical industry 

Our experts know the challenges and demands for labelling solutions in the pharmaceutical industry.

The combination of your specific product and production knowledge and our huge know-how developing labelling solutions, is a good starting point to find the right solution for your products and needs.

Years of experience and thousands of labelling projects has shown us, that early involvement of our specialists, is the best start for developing and later on deliver the most suitable solution for your production.